This listing is for a performance chip (memcal) package to suit the Holden VS series of cars including Commodore, Calais and Statesman models fitted with the Supercharged 3.8L Engine and a conversion to manual transmission. The memcal’s being provided here have been based on the HSV XU6 performance tune which from factory produce 180kw up from the standard 171kw and further enhanced to increase performance.
When used in conjunction with a good exhaust system typical power outputs that can be expected are between 180-190kw with increased torque across the rev range. Noticeable performance gains to both acceleration and throttle response are delivered as a result. The results are achieved through the recalibration of both ignition timing and fuel mapping.
Modified For Manual Transmission!
Unfortunately from the factory Holden never supplied the Supercharged V6 with a manual transmission and due to the great performance of the engine it has become a popular modification for these vehicles. This chip has been customised by Turbo Industries to allow trouble free operation when fitting a manual transmission. Please contact us to discuss which transmission you have installed and what else you may require to ensure correct operation.
Suitable For Increased Boost Pressure!
More power can be achieved through the use of a smaller pulley on the Supercharger to increase boost pressure. The standard boost pressure for these vehicles is 6 PSI and with an off the shelf performance chip such as this it is considered safe to run a maximum of 10 PSI boost pressure. We have these pulleys available for sale and offer a package deal with a discount provided. Please see our other items for this and other modifications that are suitable for your vehicle.
Easy To Install Yourself!
Replacing the chip is a fairly simple process with the PCM (Computer) located behind the kick panel below the glove box. Detailed installation instructions are provided. Installation typically takes 30 minutes with some basic tools.
Customised For Your Car!
When you purchase a tune from us we first discuss what modifications your car has and modify our base tune to best suit your vehicle. This increases performance and reduces the risk of damaging your vehicle.
Want More Power?
More power can be achieved through the use of other performance parts such as a cold air intake and an exhaust with extractors. We sell these items and more and also offer performance packages which provide discounts if you wish to purchase several items.
Dyno Tuning & Installation Service
If you require dyno tuning for increased performance or for a heavily modified vehicle we can provide this for an additional cost. Also we can offer installation of our off the shelf tunes for an additional fee if you are located within Sydney or the Central Coast. Please contact us at for more information.
When running these high performance tunes we recommend you try run a minimum of 95 Octane Premium Unleaded and where possible 98 Octane. Although it is safe to run standard 91 Octane unleaded if other alternatives are not available, it is advised that you should avoid heavy acceleration to protect your engine.